Here it is. A G5 Gulfstream. The dent is located on the right side of the fuel cell lodge just in front of the right side engine. The dent is about 3.5 inches tall and 1.5 inches wide. The Dent is located behind a recycling tank. I had them remove the tank for access. The Dent is also next to a structural rib that incases the plain. (The dent has the circle around it.) The dent was taped off and the paint was removed.
Using a video camera with a light stand, I captured the reflection of the dent through a monitor I used on the inside of the plane. They had to make sure the metal was flat at completion so they removed the paint to receive a truer read on the metal flatness. I had to treat this as if it were a high spot.

The job took 3.5 hours. After completion a metallurgist measured the depth of the dent at .020 and approved it. The traditional repair would have coasted about 175,000.00 and down time of a month or more..